Supermicro — 2028TP-DECR-DECTR-DECFR_1.0.indb

SUPERSERVER 2028TP-DECR/DECTR/DECFR User's Manual Control Panel Control Panel Figure 6-1. Front and Rear Chassis Views SAS/SATA Drives (24) 1G (2028TP-DECR & 2028TP-DECFR) or 10G (2028TP-DECTR) Ethernet Ports USB Ports IPMI LAN Port VGA Port Infi niband Port (2028TP-DECFR only) PCI-E Slots (2) Power Supplies (2) 6-2 Removing the Power Cord 1. Use the operating system to power down the node, following the on-screen prompts. 2. After the system has completely shut-down, carefully grasp the head of the power cord and gently pull it out of the back of the power supply. 3. If your system has dual power supplies, remove the cords from both power supplies. 4.

Disconnect the cord from the power strip or wall outlet. 6-3 Control Panel The control panel is located on the front of the chassis. The LEDs inform you of system status. See Chapter 3 for details on the LEDs and the control panel buttons. 6-2