SuperStorage Server 2029P-C1R(T) User's Manual Erasing Settings Erase SEL Select "Yes, On next reset" to erase all system event logs upon next system boot. Select "Yes, On every reset" to erase all system event logs upon each system reboot. Select "No" to keep all system event logs after each system reboot. The options are " No", "Yes, On next reset", and "Yes, On every reset". When SEL is Full This feature allows the user to determine what the BIOS should do when the system event log is full. Select Erase Immediately to erase all events in the log when the system event log is full. The options are Do Nothing and Erase Immediately.
BMC Network Configuration The following items will be displayed: IPMI LAN Selection: This feature displays the IPMI LAN setting. The default setting is Failover . IPMI Network Link Status: This feature displays the IPMI Network Link status. The default setting is Dedicated LAN . Station MAC Address: This feature displays the Station MAC address for this computer. Mac addresses are 6 two-digit hexadecimal numbers. VLAN: This feature displays the status of VLAN support. The default setting is Disabled . IPv4 Address Source: This feature displays the source of IPv4 addresses. The default setting is DHCP . Station IP Address: This feature displays the Station IP address for this computer.
This should be in decimal and in dotted quad form (i.e., 192.168.10.253). Subnet Mask: This feature displays the sub-network that this computer belongs to. The value of each three-digit number separated by dots should not exceed 255. Gateway IP Address: This feature displays the Gateway IP address for this computer. This should be in decimal and in dotted quad form (i.e., 192.168.10.253). IPv6 Address Status: This feature displays the IPv6 address status. The default setting is Disabled . Station IPv6 Address: This feature displays the station IPv6 address. Prefix Length: This item displays the prefix length. IPv6 Router IP Address: This feature displays the IPv6 router IP address. 116