Supermicro SuperServer 2029P-C1R(T) — Supermicro SuperServer 2029P-C1R(T) User & Service Manual PDF

Chapter 3: Maintenance and Component Installation Installing Memory ESD Precautions Electrostatic Discharge (ESD) can damage electronic com­ponents including memory modules. To avoid damaging DIMM modules, it is important to handle them carefully. The following measures are generally sufficient. Use a grounded wrist strap designed to prevent static discharge. Handle the memory module by its edges only. Put the memory modules into the antistatic bags when not in use. Installing Memory Begin by removing power from the system as described in Section 3.1. Follow the memory population sequence in the table above. 1. Push the release tabs outwards on both ends of the DIMM slot to unlock it.

Notches Release Tabs 2. Align the key of the DIMM with the receptive point on the memory slot and with your thumbs on both ends of the module, press it straight down into the slot until the module snaps into place. Key 3. Press the release tabs to the locked position to secure the DIMM module into the slot. Caution: Exercise extreme caution when installing or removing memory modules to prevent damage to the DIMMs or slots. Removing Memory To remove a DIMM, unlock the release tabs then pull the DIMM from the memory slot. 39