SUPERSERVER 4048B-TR4FT USER'S MANUAL Super IO Configuration Super IO Chip: This item displays the Super IO chip used in the motherboard. Serial Port 1 Configuration Serial Port Select Enabled to enable a serial port specified by the user. The options are En abled and Disabled. Device Settings This item displays the settings of Serial Port 1 (COM). Change Settings This option specifies the base I/O port address and the Interrupt Request address of Serial Port 1 (COM). Select Disabled to prevent the serial port from accessing any system resources. When this option is set to Disabled, the serial port becomes unavailable.
The options are Auto , IO=3F8h; IRQ=4; IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=2E8h; IRQ=IRQ=3, 4, 5, 6, 7, 10, 11, 12. Device Mode Use this feature to select the desired mode for a serial port specified. The options are 24MHz/13 and 24MHz. Device Mode Use this feature to select the desired mode for a serial port specified. The options are 24MHz/13 and 24MHz. Serial Port 2 Configuration Serial Port Select Enabled to enable a serial port specified by the user. The options are En abled and Disabled. Device Settings This item displays the settings of Serial Port 2.
Change Settings This option specifies the base I/O port address and the Interrupt Request address of Serial Port 2 (SOL). Select Disabled to prevent the serial port from accessing any system resources. When this option is set to Disabled, the serial port becomes 7-24