Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 4048B-TR4FT. Installation and maintenance should be performed by experienced technicians only. The SuperServer 4048B-TR4FT is a high-end server based on the SC418XTA- R3240B 4U rackmount chassis and the quad processor X10QBi serverboard, the X10QBi-MEM2 memory module card and the AOM-X10QBi-A I/O card. Manual Organization Chapter 1:
Introduction The first chapter provides a checklist of the main components included with the server system and describes the main features of the X10QBi serverboard and the SC418XTA-R3240B chassis. Chapter 2: Server Installation This chapter describes the steps necessary to install the SuperServer 4048B-TR4FT into a rack and check out the server configuration prior to powering up the system. If your server was ordered without processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation. Chapter 3:
System Interface Refer here for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system. Chapter 4: Standardized Warning Statements You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the 4048B-TR4FT. Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the X10QBi serverboard, including the locations and functions of connections, headers and jumpers.
Refer to this chapter when adding or removing processors or main memory and when reconfiguring the serverboard. iii