Supermicro SuperServer 4048B-TR4FT — Supermicro SuperServer 4048B-TR4FT User's Manual PDF Download

Chapter 5: Advanced Serverboard Setup Ethernet LAN Ports Two Ethernet ports (LAN1/LAN2) are located on the AOM-X10QBi-A I/O module. In addition, a dedicated IPMI LAN is also located on the I/O module to provide KVM support for IPMI 2.0. All these ports accept RJ45 type cables. IPMB I 2 C SMB A System Management Bus header for IPMI is located at JIPMB1. Connect an appropriate cable here to use the IPMB I 2 C connection on your system. Power SMB (I2C) Connector Power System Management Bus (I 2 C) Connector (JPI 2 C1) monitors power supply, fan and system temperatures. See the table on the right for pin definitions.

T-SGPIO1/2 Headers Two SGPIO (Serial-Link General Purpose Input/Output) headers are provided on the serverboard. These headers support a Serial Link interface for onboard SATA connections. See the table on the right for pin definitions.

(NC= No Connection) 5-21 LAN Ports Pin Definition Pin# Definition Pin# Definition 1 P2V5SB 10 SGND 2 TD0+ 11 Act LED 3 TD0- 12 P3V3SB 4 TD1+ 13 Link 100 LED (Yel­ low, +3V3SB) 5 TD1- 14 Link 1000 LED (Yellow, +3V3SB) 6 TD2+ 15 Ground 7 TD2- 16 Ground 8 TD3+ 17 Ground 9 TD3- 18 Ground SMB Header (JIPMB1) Pin Definitions Pin# Definition 1 Data 2 Ground 3 Clock 4 No Connection PWR SMB (JPI2C1) Pin Definitions Pin# Definition 1 Clock 2 Data 3 PWR Fail 4 Ground 5 +3.3V T-SGPIO Pin Definitions Pin# Definition Pin# Definition 1 NC 2 NC 3 Ground 4 Data 5 Load 6 Ground 7 Clock 8 NC