Supermicro SuperServer 4048B-TR4FT — Supermicro SuperServer 4048B-TR4FT User's Manual PDF Download

SUPERSERVER 4048B-TR4FT USER'S MANUAL Management Engine (ME) Recovery Use jumper JPME1 to select ME Firmware Recovery mode, which will limit resource allocation for essential system operation only in order to maintain normal power operation and management. In the single operation mode, an online upgrade will be available via Recovery mode. The default setting is Normal. Refer to the table on the right for jumper settings. Manufacturer Mode Select Close pin 2 and pin 3 of jumper JPME2 to bypass SPI flash security and force the system to operate in the Manufacturer mode, allowing the user to flash the system firmware from a host server for system- setting modifications.

The default setting is Normal. Refer to the table on the right for jumper settings. 5-26 ME Recovery Jumper Settings Jumper Setting Definition Pins 1-2 Normal Pins 2-3 ME Recovery Manufacturer Mode Select Jumper Settings Jumper Setting Definition Pins 1-2 Normal Pins 2-3 Manufacturer Mode