Chapter 1: Introduction Rear I/O Panel The SC810 is a 1U rackmount chassis. Its I/O panel provides one mother- board expansion slot, one COM port (the other is internal), two USB (Exter- nal) headers (5010H only), PS/2 mouse and keyboard ports, a graphics port and two Ethernet ports. (See Figure 1-1.) 5010E 5010H Rear of chassis External SCSI (5010H only) Mouse Port COM1 Port USB Ports VGA (Graphics) Port Keyboard Port Ethernet Ports Figure 1-1. Rear I/O Panel Cooling System The SC810 chassis has an innovative cooling design that includes a 10-cm blower system cooling (intake) fan and one optional 4-cm fan that can be installed in the midsection of the chassis.
The blower fan plugs into a chassis fan header on the motherboard and operates at full rpm continu- ously. If it breaks down, the ambient air temperature inside the chassis will rise and activate an overheat LED. 1-3