Supermicro SuperServer 5010H/5010E — Supermicro SuperServer 5010H/5010E User Manual PDF (1U Rackmount Server)

Chapter 7: AMIBIOS System Keyboard This option is to let the system know if a keyboard is Present or Absent. Primary Display This option specifies the type of monitor display you have installed on the system. The settings are Absent, VGA/EGA , Color 40 x 25, Color 80 x 25 and monochrome. Parity Check Use this option to either Enable or Disable the use of memory parity check- ing. Boot to OS/2 This option can be used to boot the system to an OS/2 operating system. The settings are No and Yes. Wait for F1 if Error This settings for this option are Enabled and Disabled. Disabled: This prevents the AMIBIOS to wait on an error for user intervention.

This setting should be used if there is a known reason for a BIOS error to appear. An example would be a system administrator must remote boot the system. The computer system does not have a keyboard currently attached. If this setting is set, the system will continue to bootup in to the operating system. If ‘F1’ is enabled, the system will wait until the BIOS setup is entered. Enabled: This option allows the system BIOS to wait for any error. If an error is detected, pressing will enter Setup and the BIOS setting can be adjusted to fix the problem. This normally happens when upgrading the hardware and not setting the BIOS to recognize it.

BIOS Hit "Delete" Message Displayed This option tells the system to display or not display the "Hit Delete to Enter Setup" message. The settings are Enabled and Disabled. Internal Cache This option is for enabling or disabling the internal CPU L1 cache. Settings include Disabled, Write-Thru and Write-Back . Disabled: This option pre- vents the system from using the internal CPU L1 cache. This setting should 7-13