Supermicro SuperServer 5011H/5011E User Manual PDF Download (EN)

® S UPER S UPER S ERVER 5011H/5011E SuperServer 5011H S UPERMICR R SuperServer 5011E S UPERMICR R USER’S MANUAL Revision 1.0a

Стр. 1

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. SUPERMICRO COMPUTER reserves the right to make changes to the product described in this manual at any time and without notice.

This product, including software, if any, and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or machine without prior written consent. IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product. Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not copy any part of this document. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Copyright © 2001 by SUPER MICRO COMPUTER INC. All rights reserved. Printed in the United States of America.

Стр. 2

Preface Preface About This Manual This manual is written for professional system integrators and PC techni- cians. It provides information for the installation and use of the Super- Server 5011H/5011E. Installation and maintainance should be performed by experienced technicians only. The SuperServer 5011H/5011E is a high-end single processor 1U rackmount server based on the SC810 1U rackmount server chassis and either the Super P3TSSR (for the 5011H) or the P3TSSE (for the 5011E) mainboard. The P3TSSR/P3TSSE mainboard supports single Intel ® Pentium TM III FCPGA 500 MHz-1.26+ GHz processors and Celeron TM FCPGA/PPGA 600-850 pro- cessors and up to 512 MB SDRAM main memory.

Manual Organization Chapter 1: Introduction The first chapter provides a checklist of the main components included with the server system and describes the main features of the Super P3TSSR and P3TSSE mainboards and the SC810 chassis. Chapter 2: Server Installation This chapter describes the steps necessary to install the SuperServer 5011H/5011E into a rack and check out the server configuration prior to powering up the system. If your server was ordered without the proces- sor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation. Chapter 3:

System Interface Refer to this chapter for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system. iii

Стр. 3

S UPER S ERVER 5011H/5011E Manual Chapter 4: System Safety You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the SuperServer 5011H/5011E. Chapter 5: Advanced Motherboard Setup Chapter 5 provides detailed information on the P3TSSR and P3TSSE motherboards, including the locations and functions of connectors, head- ers, jumpers, DIP switches and IRQs. Refer to this chapter when adding or removing processors or main memory and when reconfiguring the motherboard. Chapter 6: Advanced Chassis Setup Refer to Chapter 6 for detailed information on the SC810 1U rackmount server chassis.

You should follow the procedures given in this chapter when installing, removing or reconfiguring SCSI or peripheral drives and when replacing system power supply units and cooling fans. Chapter 7: BIOS The BIOS chapter includes an introduction to BIOS and provides detailed information on running the CMOS Setup Utility. Appendix A: BIOS Error Beep Codes and Messages Appendix B: Post Diagnostic Error Messages Appendix C: List of Figures Appendix D: System Specifications iv

Стр. 4