Chapter 1: Introduction 1-3 Server Chassis Features The following is a general outline of the main features of the SC811TQ-350B chassis. System Power For the SuperServer 5017C-TF, the SC811TQ-350B chassis includes a single 350W power supply. The SC811TQ-350B chassis was designed to support two SATA hard drives. The SATA drives are hot-swappable units. Serial ATA Subsystem Note: The operating system you use must have RAID support to enable the hot- swap capability of the SATA drives. Control Panel The control panel on the SC811TQ-350B provides important system monitoring and control information.
LEDs indicate power on, network activity, hard disk drive activ- ity and system overheat conditions. The control panel also includes a main power button and a system reset button. Rear I/O Panel The SC811TQ-350B's rear I/O panel accommodates one expansion card slot, one COM port (another is internal), two USB ports, PS/2 mouse and keyboard ports, a graphics port and two Gb Ethernet ports. Cooling System The SC811TQ-350B chassis has an innovative cooling design that features two 10-cm blower system cooling fans. The blower fans plug into a chassis fan header on the serverboard. A fan speed control setting in BIOS allows fan speed to be determined by system temperature. 1-3