Chapter 3: System Interface HDD Channel activity for all HDDs. This light indicates DVD-ROM and/or SATA drive activity when fl ashing. Power Indicates power is being supplied to the system's power supply units. This LED should normally be illuminated when the system is operating. 3-4 Serial ATA Drive Carrier LEDs Each Serial ATA drive has both a green and a red LED. Green: Each SATA drive carrier has a green LED. When illuminated, this green LED (on the front of the SATA drive carrier) indicates drive activity. A connection to the SATA backplane enables this LED to blink on and off when that particular drive is being accessed.
Please refer to Chapter 6 for instructions on replacing failed SATA drives. Red: The red LED to indicate an SATA drive failure. If one of the SATA drives fail, you should be notifi ed by your system management software. Please refer to Chapter 6 for instructions on replacing failed SATA drives. 3-3