Chapter 7: BIOS This feature selects the type of coordination for the P-State of the processor. P-State is a processor operational state that reduces the processor's voltage and frequency. This makes the processor more energy effi icient, resulting in further gains. The options are HW_ALL , SW_ALL and SW-ANY. P-STATE Coordination CPU C3 Report, CPU C6 Report This BIOS feature enables or disables C3 (ACPI C2) or C6 (ACPI C3) report- ing to the operating system. The options are Disabled and Enabled. C-State package limit setting If set to Auto, the AMI BIOS will automatically set the limit on the C-State package register. The options are C0 , C1, C6, C7 and No Limit.
X Intel® Turbo Boost Technology (Available if Intel® EIST technology is Enabled) Turbo Mode This feature allows processor cores to run faster than marked frequency in specifi c conditions. The options are Disabled and Enabled. Long duration power limit - this is the processor power consumption limit (in Watts) during a long duration time window. Long duration maintained - this is the time in milliseconds where the Long Duration Power Limit is maintained. Short duration power limit - During Turbo Mode, the system may exceed the processor's default power setting and exceed the Short Duration Power limit.
By increasing this value, the processor can provide better performance for a short duration. X Chipset Confi guration WARNING: Setting the wrong values in the following sections may cause the system to malfunction. X CPU Bridge Confi guration This item displays the current CPU Revision, Current CPU1 Memory Fre- quency, Memory Type and Memory Reference Code Revision. Memory Frequency This feature allows the user to select the memory speed. Under normal conditions, please set this to Auto. The options are Auto , Force DDR-800, Force DDR-1067, Force DDR-1333, and Force DDR-1600. 7-7