Chapter 7: BIOS Wake on LAN from S5 Select Enabled to enable the capabiltiy to 'wake-up' the system from the S5 power state (Soft Off State) through the Ethernet controller. The set- tings are Enabled and Disabled. Legacy USB Support This feature enables support for legacy USB devices. Select Auto to dis- able legacy support if USB devices are not present. Select Disable to have USB devices available only for EFI applicatioins. The options are Enabled, Disabled and Auto. BIOS EHCI Hand-Off This item is for Operating Systems that does not support Enhanced Host Controller Interface (EHCI) hand-off. When enabled, EHCI ownership change will be claimed by the EHCI driver.
The settings are Enabled and Disabled. X IDE/SATA Confi guration When this submenu is selected, the AMI BIOS automatically detects the presence of the IDE Devices and displays the following items: SATA Mode This item selects the mode for the installed drives. The options are Disabled, IDE Mode, AHCI Mode and RAID Mode. IDE Mode The following items are displayed when IDE Mode is selected: Serial-ATA Controller 0~1 This feature is used to activate/deactivate the SATA controller, and sets the compatibility mode. The options are Enhanced and Compatible. The default of Serial-ATA Controller 1 is Enhanced .
SATA Port0~Port5 This item displays the information detected on the installed SATA drives on the particular SATA port. AHCI Mode The following items are displayed when AHCI Mode is selected: 7-9