Chapter 5: Advanced Serverboard Setup The X9SPU-F motherboard supports up to 32GB of 1600/1333 MHz ECC/Non- ECC DDR3 DIMMs in four (4) memory slots (UDIMM). Please refer to the illustra tion and table below. Memory Support DIMMA1 (Blue Slot) DIMMA2 DIMMB1 (Blue Slot) DIMMB2 Memory Population Guidelines When installing memory modules, the DIMM slots should be populated in the following order: DIMMA1, DIMMB1 then DIMMA2, DIMMB2 Always use DDR3 DIMM modules of the same size, type and speed. Mixed DIMM speeds can be installed. However, all DIMMs will run at the speed of the slowest DIMM. The motherboard will support odd-numbered modules (1 or 3 modules installed).
However, for best memory performance, install DIMM modules in pairs to acti vate memory interleaving. Total System Memory 4GB 8GB 8GB 16GB 16GB 32GB Note : Up to 32GB of memory are supported using ECC or non-ECC UDIMMs. 5-9 Recommended Population (B DIMMA1 DIMMB1 DIMMA2 DIMMB2 2GB 2GB 2GB 2GB 2GB 2GB 4GB 4GB 4GB 4GB 4GB 4GB 8GB 8GB 8GB 8GB 8GB 8GB