Supermicro 5018GR-T — SUPERSERVER 5018GR-T User's Manual

SuperServer 5018GR-T User’s Manual PCI PERR/SERR Support Use this feature to enable or disable the runtime event for PCI errors. The options are Disabled and Enabled. Above 4G Decoding (Available if the system supports 64-bit PCI decoding) Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address. The options are Enabled and Disabled. SR-IOV Support (Available if the system supports Single-Root Virtualization) Select Enabled for Single-Root IO Virtualization support. The options are Enabled and Disabled. Maximum Payload Select Auto for the system BIOS to automatically set the maximum payload value for a PCI-E device to enhance system performance.

The options are Auto , 128 Bytes and 256 Bytes. Maximum Read Request Select Auto for the system BIOS to automatically set the maximum size for a read request for a PCI-E device to enhance system performance. The options are Auto , 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes. ASPM Support Use this item to set the Active State Power Management (ASPM) level for a PCI-E device. Select Auto for the system BIOS to automatically set the ASPM level based on the system configuration. Select Disabled to disable ASPM support. The options are Disabled and Auto. Warning : Enabling ASPM support may cause some PCI-E devices to fail!

MMIOHBase Use this item to select the base memory size according to memory-address map­ ping for the IO hub. The base memory size must be between 4032G to 4078G. The options are 56T , 48T, 24T, 512G, and 256G.\ MMIO High Size Use this item to select the high memory size according to memory-address mapping for the IO hub. The options are 256G , 128G, 512G, and 1024G. RSC-R1UFF-E16 CPU1 SLOT1 PCI-E x16 OPROM Select Enabled to enable Option ROM support to boot the computer using a de­ vice installed on the slot specified by the user. The options are Disabled, Legacy and EFI. 7-22