Supermicro SuperServer 5019S-ML — 6.2 Main Setup

SuperServer 5019S-ML User's Manual Chapter 6: BIOS Chapter 6 How To Change the Configuration Data BIOS The configuration data that determines the system parameters may be changed by entering the AMI BIOS setup utility. This setup utility can be accessed by pressing at the appropriate time during system boot. Note : For AMI UEFI BIOS Recovery, please refer to the UEFI BIOS Recovery User Guide posted at http://www.supermicro.com/support/manuals/ . 6.1 Introduction This chapter describes the AMIBIOS™ setup utility for the X11SSH-F motherboard. The BIOS is stored on a Flash EEPROM and can be easily upgraded using a flash program. 6.2 Main Setup Note:

Due to periodic changes to the BIOS, some settings may have been added or deleted and might not yet be recorded in this manual. Please refer to the Manual Download area of our website for any changes to BIOS that may not be reflected in this manual. When you first enter the AMI BIOS setup utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab on the top of the screen. The Main BIOS setup screen is shown below. The following Main menu items will display: Starting the Setup Utility To enter the BIOS setup utility, enter the key while the system is booting up. (In most cases, the key is used to invoke the BIOS setup screen.

There are a few cases when other keys are used, such as , , etc.) Each main BIOS menu option is described in this manual. The main BIOS screen has two main frames. The left frame displays all the options that can be configured. “Grayed-out” options cannot be configured. The right frame displays the key legend. Above the key legend is an area reserved for a text message. When an option is selected in the left frame, it is highlighted in white. Often a text message will accompany it. Note that BIOS has default text messages built in. We retain the option to include, omit, or change any of these text messages. Settings printed in Bold are the default values. A " " indicates a submenu.

Highlighting such an item and pressing the key will open the list of settings within that submenu. The BIOS setup utility uses a key-based navigation system called hot keys. Most of these hot keys ( , , , , keys, etc.) can be used at any time during the setup navigation process. Notes : Options printed in Bold are default settings. is used to load optimal default settings. is used to save the settings and exit the setup utility. This BIOS is shared with the X11SSH-LN4F and some settings listed may only apply to that motherboard. 61 60