SuperServer 5019S-ML User's Manual Chapter 6: BIOS the user with greater reliability, security and availability in networking and data-sharing. The settings are Enabled and Disabled. Power Limit 2 Override Select Enabled to support rapid power limit (PL2) override. The default setting is Enabled . Hardware Prefetcher (Available when supported by the CPU) Power Limit 2 Use this item to configure the value for Power Limit 2. The value is in milli watts and the step size is 125mW. Use the number keys on your keyboard to enter the value. Enter 0 to use the manufacture default setting If the value is 0, the BIOS will set PL2 as 1.25* TDP. Enter 0 to use the manufacture default setting.
If set to Enabled, the hardware prefetcher will prefetch streams of data and instructions from the main memory to the L2 cache to improve CPU performance. The options are Disabled and Enabled . Adjacent Cache Line Prefetch (Available when supported by the CPU) 1-Core Ratio Limit Override This increases (multiplies) 1 clock speed in the CPU core in relation to the bus speed when one CPU core is active. Press "+" or "-" on your keyboard to change the value. Enter 0 to use the manufacture default setting. Select Disabled for the CPU prefetcher to prefetch the cache line for 64 bytes. Select Enabled for the CPU prefetcher to prefetch both cache lines for 128 bytes as comprised.
The options are Enabled and Disabled. 2-Core Ratio Limit Override This increases (multiplies) 2 clock speeds in the CPU core in relation to the bus speed when two CPU cores are active. Press "+" or "-" on your keyboard to change the value. Enter 0 to use the manufacture default setting. CPU AES Select Enabled to enable Intel CPU Advanced Encryption Standard (AES) Instructions for CPU to enhance data integrity. The options are Enabled and Disabled. Boot Performance Mode This feature allows the user to select the performance state that the BIOS will set before the operating system handoff. The options are Power Saving, Max Non-Turbo Performance and Turbo Performance.
3-Core Ratio Limit Override This increases (multiplies) 3 clock speeds in the CPU core in relation to the bus speed when three CPU cores are active. Press "+" or "-" on your keyboard to change the value. Enter 0 to use the manufacture default setting. HardWare P-States (HWP) 4-Core Ratio Limit Override This increases (multiplies) 4 clock speeds in the CPU core in relation to the bus speed when three CPU cores are active. Press "+" or "-" on your keyboard to change the value. Enter 0 to use the manufacture default setting. Use this feature to enable or disable hardware P-States support. The options are Disabled and Enabled.
Intel® SpeedStep™ Intel SpeedStep Technology allows the system to automatically adjust processor voltage and core frequency to reduce power consumption and heat dissipation. The options are Disabled and Enabled . CPU C-States Use this feature to enable the C-State of the CPU. The options are Disabled and Enabled . Enhanced C-States Turbo Mode Use this feature to enable the enhanced C-State of the CPU. The options are Disabled and Enabled . Select Enabled for processor cores to run faster than the frequency specified by the manufacturer. The options are Disabled and Enabled .
C-State Auto Demotion Package Power Limit MSR Lock Select Enabled to lock the package power limit for the model specific registers. The op tions are Disabled and Enabled. Use this feature to prevent unnecessary excursions into the C-states to improve latency. The options are Disabled, C1, C3, and C1 and C3 . C-State Un-Demotion Power Limit 1 Override Select Enabled to support average power limit (PL1) override. The default setting is Disabled . This feature allows the user to enable or disable the un-demotion of C-State. The options are Disabled, C1, C3, and C1 and C3. 67 66