Supermicro SuperServer 5019S-ML — Quick Reference Table

SuperServer 5019S-ML User's Manual Chapter 1:

Introduction Quick Reference Table Connector Description Jumper Description Default Setting PCI-E (CPU) Slot 5 PCI-Express 3.0 x8 Slot SP1 Internal Speaker/Buzzer USB 2/3, USB 4/5 Front Accessible USB 2.0 Headers USB 8/9 Front Accessible USB 3.0 Header JWD1 Watch Dog Enable Pins 1-2 (Reset) VGA Back Panel VGA Port LED Description Status Connector Description LAN1-LAN2 Gigabit (RJ45) LAN Ports 15 14 PCI-E (PCH) Slot 4 PCI-Express 3.0 x4in x8 Slot JBR1 BIOS Recovery Pins 1-2 (Normal) JBT1 Clear CMOS See Chapter 4 JI2C1/JI2C2 SMB to PCI Slots Enable/Disable Pins 2-3 (Disabled) JPB1 BMC Enable/Disable Pins 1-2 (Enabled) JPG1 VGA Enable/Disable Pins 1-2 (Enabled) JPL1-JPL2 LAN1-LAN2 Enable/Disable Pins 1-2 (Enabled) JPME2 Manufacturing Mode Select Pins 1-2 (Normal) PCI-E (CPU) Slot 6 PCI-Express 3.0 x8 in x16 Slot USB 0/1 Back Panel USB 2.0 Ports USB 6/7 Back Panel USB 3.0 Ports USB 10 USB 3.0 Type-A Header LE1 Rear UID LED Blue:

On; Unit identified LE3 PCI-E 3.0 M.2 LED Green: Blinking; Active LEDBMC BMC Heartbeat LED Green: Blinking; BMC normal LEDPWR Onboard Power LED Green:

Solid on; Power on BT1 Onboard Battery COM1/COM2 COM1/COM2 Port Headers Fan1-Fan4, FanA System/CPU Fan Headers I-SATA0-I-SATA7 SATA 3.0 Connectors via Intel PCH (6Gb/s) I-SGPIO 1/2 Serial Link General Purpose I/O Headers IPMI LAN Dedicated IPMI Gigabit (RJ45) LAN Port J23 M.2 Socket JD1 Speaker/Power LED Indicator JF1 Front Panel Control Header JIPMB1 4-pin External BMC I2C Header (for an IPMI Card) JL1 Chassis Intrusion Header JOH1 Overheat LED Indicator JPI2C1 Power I2C System Management Bus (Power SMB) Header JPWR1 24-pin ATX Main Power Connector (Required) JPWR2 +12V 8-pin CPU power Connector (Required) JSD1/JSD2 SATA Disk On Module (DOM) Power Connectors JSTBY1 Wake-On-LAN Enable Header JTPM1 Trusted Platform Module/Port 80 Connector JUIDB1 UID (Unit Identification) Switch