SUPERSERVER 5028TK-HTR/HTTR User's Manual 5-2 Connecting Cables Connecting Data Cables The cables used to transfer data from the peripheral devices have been carefully routed in preconfigured systems to prevent them from blocking the flow of cooling air that moves through the system from front to back. If you need to disconnect any of these cables, you should take care to reroute them as they were originally after reconnecting them (make sure the red wires connect to the pin 1 locations). If you are configuring the system, keep the airflow in mind when routing the cables. 5-3 Rear I/O Ports See Figure 5-1 below for the and locations of the various rear I/O ports and the UID switch.
3 4 2 1 5 6 7 Figure 5-1. Rear I/O Ports 5-2 Rear I/O Ports 1 GLAN Port 1 (K1SPi) / 10G LAN Port 1 (K1SPi-T) 2 GLAN Port 2 (K1SPi) / 10G LAN Port 2 (K1SPi-T) 3 USB 3.0 Port 1 4 USB 3.0 Port 0 5 UID Switch 6 VGA Port 7 Dedicated IPMI LAN Port