Chapter 7: BIOS L0s Support When this item is set to Disable, II0 will not put its transmitter in the L0s state. The options are Disable and Enable. IOAT (Intel® IO Acceleration) Configuration Relaxed Ordering Select Enable to enable Relaxed Ordering support which will allow certain transactions to violate the strict-ordering rules of PCI bus for a transaction to be completed prior to other transactions that have already been enqueued. The options are Disable and Enable. IIO Generation Configuration IIO ACPI (Advanced Configuration Power Interface) Select Enable to enable Advanced Configuration Power Interface (ACPI) support for the IO device specified by the user.
The options are Enable and Disable. Intel VT for Directed I/O (VT-d) Intel VT for Direct I/O (VT-d) PCI Express Global Options The section allows the user to configure the following PCI-E global options: WA 4167453 Select Enable for WA 4167453 support. The options are Disable and Enable. NoSnoop (No Snoop) Config. (Configuration) Use this item to configure the no-snoop mode setting for each PCI-E device. The options are VC0/VCP/VC1 and VC1. Halt On DMI Degradation Select Enable to put the system on hold during DMI width/link degradation. The options are Disable and Enable. Power Down Unused Ports Select Disable to power down the ports that are not being used.
The options are Disable and Disable Unused Ports (No IIO Clock Gating) . 7-13