SuperServer 5038MD-H24TRF User's Manual Motherboard Jumpers, Connectors, and LEDs 14 Jumper Description Default Setting P1/P2-JBR1 BIOS Recovery Pins 1-2 (Normal) P1/P2-JBT1 CMOS Clear See Chapter 3 P1/P2-JPB1 BMC Enable/Disable Pins 1-2 (Enabled) P1/P2-JPG1 VGA Enable/Disable Pins 1-2 (Enabled) P1/P2-JPL1 LAN1/2 Enable/Disable Pins 1-2 (Enabled) P1/P2-JPME1 ME Recovery Pins 1-2 (Normal) P1/P2-JPME2 Manufacturing Mode Select Pins 1-2 (Normal) P1/P2-JWD1 Watch Dog Enable Pins 1-2 (Reset) Connector Description IPMI LAN _ Dedicated IPMI LAN Port J27 Hard Drive Backplane Connector KVM KVM/VGA/USB/COM (UART) Connector for Remote Console Redirection or Remote Network Interface P1/P2-BT1 Onboard Battery P1/P2-LAN1/LAN2 Front Panel LAN Ports SW1 Power Switch SW2 Node 1/Node 2 switch and indicator for VGA, USB, and COM port signals LED Description Status LED7 UID LED Blue, Blinking:
Unit Identified Red, Solid On Overheat LED8 Overheat/Power Fail LED (Bottom of the board) Red, Blinking: Power Fail LEDM1/M2 BMC Heartbeat LEDs Green, Blinking: Active P1/P2 Power LED Onboard Power LEDs Green, Solid On: Power On SW2 Node 1/Node 2 switch and indicator for VGA, USB, and COM port signals Green: Node 1 Orange: Node 2