Supermicro 5038MD-H24TRF — Supermicro SuperServer 5038MD-H24TRF User's Manual PDF

SuperServer 5038MD-H24TRF User's Manual the read data from memory turns out to be a correctable error, the error is corrected and sent to the requestor (the original source). Memory is updated as well. Select Enable to use Demand Scrubbing for ECC memory correction. The options are Disable and Enable . Device Tagging Select Enable to support device tagging that generates stuck bits or hard errors. The options are Disable and Enable. South Bridge The following South Bridge information will display: USB Configuration USB Module Version USB Devices Legacy USB Support This feature enables support for legacy USB devices. Select Auto to disable legacy support if USB devices are not present.

Select Disable to have USB devices available only for EFI applications. The options are Enabled, Disabled, and Auto. EHCI Hand-Off This item is for the Operating Systems that do not support Enhanced Host Controller Interface (EHCI) hand-off. When this item is enabled, EHCI ownership change will be claimed by the EHCI driver. The options are Disabled and Enabled. Port 60/64 Emulation This feature enables or disables I/O port 60h/64h emulation support. This should be enabled for complete USB keyboard legacy support for non-USB-aware Operating Systems. The options are Disabled and Enabled .

EHCI1 Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on USB 2.0 connector #1 (at least one USB 2.0 connector should be enabled for EHCI support). The options are Disabled and Enabled . EHCI2 Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on USB 2.0 connector #2 (at least one USB 2.0 connector should be enabled for EHCI support). The options are Disabled and Enabled . 58