Supermicro 5038MD-H24TRF — Supermicro SuperServer 5038MD-H24TRF User's Manual PDF

Chapter 6: BIOS Extended Tag Use this item to allow a device to use the 8-bit tag field as a requester. The options are Disabled and Enabled. ARI Forwarding When this feature is enabled, the Downstream Port disables its traditional device number to 0 when turning Type1 Configuration Request into a Type0 Configuration Request. The default value is Disabled . ASPM Support Use this item to set the Active State Power Management (ASPM) level for a PCI-E device. Select Auto for the system BIOS to automatically set the ASPM level based on the system configuration. Select Disabled to disable ASPM support. The options are Disabled and Auto.

Onboard LAN Option ROM Type Select Enabled to enable Option ROM support to boot the computer using a network device specified by the user. The options are Legacy and EFI. P1 Onboard LAN1 Option ROM Use this option to select the type of device installed in LAN Port1 used for system boot. The default setting for LAN1 Option ROM is PXE . The options are Disabled, PXE , and iSCSI. P1 Onboard LAN2 Option ROM Use this option to select the type of device installed in LAN Port2 used for system boot. The default setting for LAN2 Option ROM is Disabled . Onboard Video Option ROM Use this item to select the Onboard Video Option ROM type. The options are Disabled, Legacy, and EFI.

VGA Priority This feature allows the user to select the graphics adapter to be used as the primary boot device. The options are Onboard and Offboard. Network Stack Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible Firmware Interface) for network stack support. The options are Enabled and Disabled. *If the item above set to Enabled, the four items below will become available for configuration: IPv4 PXE Support Select Enabled to enable IPv4 PXE boot support. The options are Enabled and Disabled. 61