Chapter 1: Introduction 1.3 System Features The following table provides you with an overview of the main features of the 5038MD- H24TRF. Refer to Appendix D for additional specifications. System Features Motherboards X10SDE-DF, twelve, each supporting a pair of computing nodes Chassis SC939HX-R1K63B twelve hot-swap motherboard sleds CPU (each motherboard) Intel Xeon D-1531, Pentium in a System-on-a-Chip (SoC), two per motherboard, one per node Memory (each motherboard) Eight (8) 288-pin DIMM slots (four per node) support up to: 128GB of VLP ECC 2400/2133/1866/1600/1333MHz RDIMM memory. Note :
2400MHz is only supported when using 16GB DDR4 RDIMM ECC memory 64GB of VLP ECC 2133/1866/1600/1333MHz UDIMM memory. DIMM sizes: 32GB, 16GB, 8GB, and 4GB, up to 128GB for RDIMM memory or up to 64GB for UDIMM memory Chipset na Hard Drives (each motherboard) Up to two fixed 2.5" SATA3 drives (24 total), or up to four 2.5" slim solid state drives (with a kit),(48 total) Network (each motherboard) Four Intel i350 1Gb Ethernet ports One dedicated IPMI 2.0 LAN Power Dual 1620 W modules, 80+ Platinum level Cooling Four 9-cm 7.5 K RPM, 4-pin PWM rear exhaust fans; one airflow shroud per node Form Factor 3U rackmount Dimensions (WxHxD) 17.3 x 5.21 x 23.2 in. (438 x 133 x 589 mm) 9