Supermicro 5038MD-H8TRF — Supermicro SuperServer 5038MD-H8TRF User's Manual (Revision 1.0) PDF

Appendix D: System Specifications Appendix D System Specifications Processors (each motherboard) Single Intel Xeon D-1541, Pentium in a System-on-a-Chip (SoC). 45W max TDP. BIOS 128Mb AMI BIOS SPI Flash BIOS Memory (each motherboard) Four 288-pin DIMM slots support up to: 128GB of ECC 2400/2133/1866/1600/1333MHz RDIMM memory. 64GB of ECC 2133/1866/1600/1333MHz UDIMM memory. Note : 2400MHz is only supported when using DDR4 RDIMM ECC memory, with both DIMMs populated (Both A1/A2 or B1/B2).

32GB, 16GB, 8GB, and 4GB, up to 128GB for RDIMM memory or up to 64GB for UDIMM memory at 1.2V Drive Bays Up to sixteen hot-swap 3.5" SATA3 drives, or 2.5" drives with a kit PCI Expansion Slots (each motherboard) One (1) Micro-LP PCI Express 3.0 x8 slot (CPU1 Slot1) (JPCIE1) One (1) PCI Express 3.0 x8 slot (JPCIE2) Two (2) M.2 M-key PCI Express 3.0 x 4 connectors (JMD1 & JMD2) One (1) M.2 M-key PCI Express 2.0 x 4 connector (JMD3) One (1) M.2 M-key PCI Express 2.0 x 2 connector (JMD4) Input/Output (each motherboard) One serial port on the rear I/O panel (COM1) via KVM Two SATA 3.0 connectors to HDD via backplane; four (4) SATA 3.0 connectors via M.2 SATA from add-on card (AOC) (S-SATA/SAS0 & S-SATA/SAS1) Motherboard (each node) X10SDD-F (proprietary form factor) Dimensions:

4.75" (L) x 18.5" (W) (121 mm x 470 mm) Chassis SC938BH-R1K68B; 3U rackmount, eight distinct node sleds Dimensions: (WxHxD) 17.3 x 5.21 x 23.2 in. (438 x 132 x 589 mm) Weight Net Weight: 62.2 lbs (28.21 kg) Gross Weight: 88 lbs (39.92 kg) System Cooling Four 8-cm 11K RPM, 4-pin PWM mid-chassis fans; one airflow shroud per node Power Supply Model: PWS-1K68A-1R, 80+ level Titanium AC Input Voltages: 100-240 VAC Rated Input Current: 800W Output @ 100-140V, 7-10A; 1600W Output @ 180-240V, 8-11A Rated Input Frequency: 50-60 Hz Rated DC Output Power: 800W: +12V/67A, +5Vsb/1A; 1600W: +12V/133A, +5Vsb/1A 113