Supermicro 5038MD-H8TRF — Supermicro SuperServer 5038MD-H8TRF User's Manual (Revision 1.0) PDF

SuperServer 5038MD-H8TRF User's Manual Motherboard Jumpers, Connectors, and LEDs 14 Jumper Description Default Setting J5 HDD BP Selection Pins 1-2 (SATA) JBT1 Clear CMOS See Chapter 4 JI2C1/JI2C2 SMB to PCI Slots Pins 2-3 (Disabled) JP2 M.2 slots SMB Enable/Disable Pins 1-2 (Enabled) JPG1 VGA Enable Pins 1-2 (Enabled) JPME1 ME Recovery Pins 1-2 (Normal) JPME2 Manufacturing Mode Select Pins 1-2 (Normal) JWD1 Watch Dog Enable Pins 1-2 (Reset) Connector Description BT1 Onboard Battery IPMI LAN _ Dedicated IPMI Gigabit (RJ45) Port JIPMB1 4-pin External BMC I2C Header (for an IPMI Card) JKVM1 KVM/VGA (Monitor) (UART) Connector for Remote Console Redirection or Remote Network Interface JMD1 M.2 PCI-E 3.0 x4/I-SATA2 JMD2 M.2 PCI-E 3.0 x4/I-SATA3 JMD3 M.2 PCI-E 2.0 x4/I-SATA4 JMD4 M.2 PCI-E 2.0 x2/I-SATA 5 JPCIE1 Micro-LP PCI-E 3.0 x8 JPCIE2 Slot1 PCI-E 3.0 x8 JTPM1 Trusted Platform Module (TPM)/Port 80 Connector JUIDB1 UID (Unit Identification) Switch S-SATA/SAS0 For SAS AOC use S-SATA/SAS1 For SAS AOC use S-SGPIO1 Serial Link General Purpose Header SW1 Power Switch/LED Indicator USB0/1 Back panel USB 2.0 ports via KVM USB2 USB 3.0 Type-A Header LED Description State:

Status LED1 Unit ID LED Blue Solid On: Unit Identified LED2 Overheat/PWR Fail/Fan Fail LED Solid Red: Overheat, Blinking: PWR Fail/Fan Fail LEDM1 BMC Heartbeat LED Green Blinking: BMC Normal