Chapter 2 Installation in a Rack Installing the Inner Rails Begin the rack mounting procedure by installing the inner rails to the chassis. 1. Identify the left and right inner rails. They are labeled. 2. Place the inner rail firmly against the side of the chassis, aligning the hooks on the side of the chassis with the holes in the inner rail. 3. Slide the inner rail forward toward the front of the chassis and under the hooks until the quick release bracket snaps into place, securing the rail to the chassis. 4. If desired, add screws (two flat head M4 x 4mm) through the rail into the chassis for extra security. Inner Rails 1 4 1 2 1 3 1 4 Figure 2-3. Installing the Rails Warning:
Do not pick up the server with the front handles. They are designed to pull the system from a rack only. 21