Chapter 3: Maintenance and Component Installation 3.3 Motherboard Components Memory Installation Memory Support The X10SDD-F supports DDR4 ECC memory; up to 64GB of Unbuffered (UDIMM) memory or up to 128GB of Registered (RDIMM) memory in four memory slots. Populating these DIMM modules with a pair of memory modules of the same type and size will result in interleaved memory, which will improve memory performance. Check the Supermicro website for possible updates to memory support. DIMM Module Population Configuration For optimal memory performance, follow the table below when populating memory. Note :
2400MHz memory speed is only supported when using DDR4 RDIMM ECC memory, with both DIMMs populated (both A1/A2 or B1/B2). 31 Memory Module Population for Optimal Performance Number of DIMMs Memory Population Configuration Table 2 DIMMs DIMMA1/DIMMB1 4 DIMMs DIMMA1/DIMMB1, DIMMA2/DIMMB2 Memory Module Population DIMM Slots per Channel DIMM Type POR Speeds (MHz) Ranks per DIMM Layer Count FW Base Supported Voltage 2 DDR4 ECC 2400, 2133,1866, 1600, 1333 SR, DR 6 SPS 1.2V1 Memory Module Population Max Memory Possible 4GB DRAM Technology 8GB DRAM Technology Single Rank UDIMM 16GB (4x 4GB DIMMs) 32GB (4x 8GB DIMMs) Dual Rank UDIMMs 32GB (4x 8GB DIMMs) 64GB (4x 16GB DIMMs)