SuperServer 5038MD-H8TRF User's Manual Removing the Dummy Drive from the Drive Carrier 1. Remove the hard drive carrier from the chassis as described in the previous section and lay the drive carrier on a flat surface. 2. Remove the two screws securing the dummy drive to the drive carrier. 3. Lift the dummy drive from the drive carrier. Caution: Except for short periods of time (swapping hard drives), do not operate the server with the hard drive carriers removed from the bays, regardless of how many hard drives are installed, for proper airflow. Dummy Drive 1 2 Drive Carrier 1 2 Figure 3-8. Removing a Dummy Drive from the Drive Carrier Note:
Enterprise level hard disk drives are recommended for use in Supermicro servers. For information on recommended HDDs, visit the Supermicro Web site at http://www.supermicro. com/products/nfo/storage.cfm . 38