Chapter 6: BIOS Memory Frequency Use this feature to set the maximum memory frequency for onboard memory modules. The options are Auto , 1333, 1400, 1600, 1800, 1867, 2000, 2133, 2200, 2400, 2600, 2667, 2800, 2993, 3000, 3200, and Reserved (Do not select Reserved). Data Scrambling Select Enabled to enable data scrambling to enhance system performance and data integrity. The options are Auto , Disabled, and Enabled. DRAM RAPL Baseline Use this feature to set the run-time power-limit baseline for DRAM modules. The options are Disable, DRAM RAPL Mode 0, and DRAM RAPL Mode 1 .
Set Throttling Mode Throttling improves reliability and reduces power consumption in the processor via automatic voltage control during processor idle states. The options are Disabled and CLTT (Closed Loop Thermal Throttling). A7 Mode Select Enabled to support the A7 (Addressing) mode to improve memory performance. The options are Disable and Enable . DIMM Information This item displays the status of a DIMM module specified by the user. DIMMA1 DIMMB1 DIMMA2 DIMMB2 Memory RAS (Reliability Availability Serviceability) Configuration Use this submenu to configure the following Memory RAS settings.
Patrol Scrub Patrol Scrubbing is a process that allows the CPU to correct correctable memory errors detected on a memory module and send the correction to the requestor (the original source). When this item is set to Enabled, the IO hub will read and write back one cache line every 16K cycles, if there is no delay caused by internal processing. By using this method, roughly 64 GB of memory behind the IO hub will be scrubbed every day. The options are Disable and Enable . 65