Supermicro 5038MD-H8TRF — Supermicro SuperServer 5038MD-H8TRF User's Manual (Revision 1.0) PDF

SuperServer 5038MD-H8TRF User's Manual inactivity, and will return the link to an active state when I/O activity resumes. The options are Enabled and Disabled. SATA Port 0 ~ Port 5 This item displays the information detected on the installed SATA drive on the particular SATA port. Model number of drive and capacity Software Preserve Support Port 0 ~ Port 5 Hot Plug Set this item to Enabled for hot-plugging support, which will allow the user to replace a SATA drive without shutting down the system. The options are Enabled and Disabled. Port 0 ~ Port 5 Spin Up Device On an edge detect from 0 to 1, set this item to allow the PCH to initialize the device. The options are Enabled and Disabled .

Port 0 ~ Port 5 SATA Device Type Use this item to specify if the SATA port specified by the user should be connected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk Drive and Solid State Drive. Server ME Configuration The following Server ME Configuration information will display: Operational Firmware Version ME Firmware Type Recovery Firmware Version ME Firmware Features ME Firmware Status #1 ME Firmware Status #2 Current state Error Code 68