SuperServer 5038MD-H8TRF User's Manual JMD1 M.2 PCI-E 3.0 X4 OPROM Use this feature to select which firmware type to be loaded for the add-on card in this slot. The options are Disabled, Legacy , and EFI. JMD2 M.2 PCI-E 3.0 X4 OPROM Use this feature to select which firmware type to be loaded for the add-on card in this slot. The options are Disabled, Legacy , and EFI. JMD3 M.2 PCI-E 2.0 X4 OPROM Use this feature to select which firmware type to be loaded for the add-on card in this slot. The options are Disabled, Legacy , and EFI. JMD4 M.2 PCI-E 2.0 X2 OPROM Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy , and EFI. Onboard Video Option ROM Use this item to select the Onboard Video Option ROM type. The options are Disabled, Legacy, and EFI. VGA Priority This feature allows the user to select the graphics adapter to be used as the primary boot device. The options are Onboard and Offboard. Network Stack Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible Firmware Interface) for network stack support. The options are Disabled and Enabled. *If the item above set to Enabled, the four items below will become available for configuration: IPv4 PXE Support Select Enabled to enable IPv4 PXE boot support.
The options are Disabled and Enabled . IPv6 PXE Support Select Enabled to enable IPv6 PXE boot support. The options are Disabled and Enabled. PXE boot wait time Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press "+" or "-" on your keyboard to change the value. The default setting is 0 . Media detect count Use this option to specify the number of times media will be checked. Press "+" or "-" on your keyboard to change the value. The default setting is 1 . 70