S UPER S ERVER 6040 Manual AMI BIOS Error Beep Codes A-2 Beep Code Error Message Description 1 beep Refresh The memory refresh circuitry on the motherboard is faulty 2 beeps BIOS ROM file absent The BIOS was unable to find the specific file name required to flash the BIOS 3 beeps Base 64KB memory failure Memory failure occurred in the first 64KB of Memory 4 beeps Flash program successful The flash was properly programmed with the BIOS ROM file. 5 beeps Media read error The floppy or ATAPI media is not presented or cannot be read 6 beeps Keyboard controller Gate A20 failure The keyboard controller may be bad. The BIOS cannot switch to protected mode.
7 beeps Processor exception interrupt error The CPU generated an exception interrupt 8 beeps Display memory read/write error The system video adapter is either missing or its memory is faulty. This is not a fatal error. 10 beeps Flash erase error The flash device was unable to be properly programmed. 11 beeps Flash program error The flash device was unable to be properly programmed. 12 beeps BIOS ROM file incorrect size The BIOS ROM file found does not match the size of the flash device 13 beeps BIOS ROM image mismatch The BIOS ROM file layout configuration does not match image present in the flash device.
5 short + 1 _ long beeps Memory Error No memory detected in the system 6 short + 1 long beeps Memory Error EDO memory detected in system 7 short + 1 long beeps SMBUS Error SMBUS error