S UPER S ERVER 6040 Manual Peripheral Device Configuration Onboard SCSI This option allows you to Enable the onboard SCSI. The settings are En- abled and Disabled. Power Lost Control This option determines how the system will respond when power is reap- plied after a power loss condition. Always On means the system will automatically start up when power is reapplied. Always Off means you must push the main power button to restart the system after power is restored. System Health Monitor The BIOS continuously monitors the health of your system by measuring certain voltage levels and temperatures.
CPU1 Current Temperature CPU2 Current Temperature This option allows the system to auto detect and display the temperatures of CPU1 and CPU2. BIOS System Overheat Warning This option allows you to Enable or Disable a system overheat warning signal, used to notify you in the event of a dangerous rise in heat levels. Overheat Warning Temperature This option allows you to specify the temperature threshold that, when exceeded, will trigger the overheat warning alarm. The rest of the System Health Monitor menu lists various voltages and tem- peratures as they are currently being measured.
These include CPU tem- perature, CPU voltage, the rpms of the CPU, chassis and thermal control fans as well as the primary voltage levels used by the system: +3.3V, +5V, +12V and -12V. Items such as H/W Monitor CPU1VCORE, H/W Monitor CPU2VCORE, H/W Monitor +3.3V, H/W Monitor +5V, H/W Monitor +12V, CPU Fan1, CPU Fan2, ChassisFan1, Chassis Fan2 are also included in this op- tion. 7-14