SUPERSERVER 8048B-TR4FT USER'S MANUAL Use this item to set the display mode for the Option ROM. Select Keep Current to use the current AddOn ROM Display setting. Select Force BIOS to use the Option ROM display set by the system BIOS. The options are Force BIOS and Keep Current. AddOn ROM Display Mode Bootup Num-Lock Use this item to set the power-on state for the Numlock key. The options are Off and On . Wait For 'F1' If Error Select Enabled to force the system to wait until the 'F1' key is pressed when an error occurs. The options are Disabled and Enabled . Re-try Boot If this item is set to Enabled, the system BIOS will continuously try to boot from the selected boot drive.
The options are Disabled , Legacy Boot, and EFI Boot. Interrupt 19 Capture Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to Immediate, the BIOS ROM of the host adaptors will immediately capture Interrupt 19 at bootup and allow the drives that are attached to these host adaptors to function as bootable disks. If this item is set to Postponed, the BIOS ROM of the host adaptors will only capture Interrupt 19 during bootup from a legacy device. The options are Immediate and Postponed.
Power Confi guration Watch Dog Function If enabled, the Watch Dog timer will allow the system to automatically reboot when a non-recoverable error that lasts for more than fi ve minutes occurs. The options are Enabled and Disabled. Power Button Function If this item is set to Instant Off, the system will power off immediately as soon as the user presses the power button. If this item is set to 4 Seconds Override, the system will power off when the user presses the power button for 4 seconds or longer. The options are Instant Off and 4 Seconds Override. 7-4