Supermicro 8048B-TRFT — SuperServer 8048B-TRFT User's Manual

Chapter 7: BIOS COM1 Console Redirection COM 1 Console Redirection This submenu allows the user to configure the following Console Redirection set­ tings for this port. Console Redirection Select Enabled for Console Redirection support. The options are Enabled and Disabled . COM2/SOL Console Redirection This submenu allows the user to configure the following Console Redirection set­ tings for the SOL Port specified by the user. Console Redirection Select Enabled to use the SOL Port for Console Redirection. The options are Enabled and Disabled.

Console Redirection Settings This feature allows the user to specify how the host computer will exchange data with the client computer, which is the remote computer used by the user. Terminal Type This feature allows the user to select the target terminal emulation type for Con­ sole Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to add color and function key support. Select ANSI to use the Extended ASCII Char­ acter Set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters into one or more bytes. The options are ANSI, VT100, VT100+ , and VT-UTF8. Bits Per second Use this feature to set the transmission speed for a serial port used in Console Redirection.

Make sure that the same speed is used in the host computer and the client computer. A lower transmission speed may be required for long and busy lines. The options are 9600, 19200, 38400, 57600 and 115200 (bits per second). Data Bits Use this feature to set the data transmission size for Console Redirection. The options are 7 Bits and 8 Bits . Parity A parity bit can be sent along with regular data bits to detect data transmission errors. Select Even if the parity bit is set to 0, and the number of 1's in data bits 7-39