Supermicro 8048B-TRFT — SuperServer 8048B-TRFT User's Manual

SUPERSERVER 8048B-TRFT USER'S MANUAL If the server overheats, you should check the following: Use the LEDs to determine the nature of the overheating condition. Confirm that the chassis covers are installed properly. Check the routing of the cables and make sure all fans are present and operating normally. Finally, verify that the heatsinks are installed properly. 3-4 Drive Carrier LEDs Each hard drive carrier has two LEDs. Blue: Solid on = Drive is present and available. Blinking = Drive is actively being accessed. Each drive carrier has a blue LED. When illuminated in a solid on state, this blue LED (on the front of the drive carrier) indicates drive activity.

A connection to the hard drive backplane enables this LED to blink on and off when that particular drive is being accessed. Red: Solid on = Drive failure Blinking = Rebuilding RAID The red LED to indicate a drive failure. If one of the drives fail, you should be notified by your system management software. 3-4