Supermicro 8048B-TRFT — SuperServer 8048B-TRFT User's Manual

Chapter 6: Advanced Chassis Setup 6-7 Power Supply The 8048B-TRFT has four (2+2) redundant, high-efficiency 1620 Watt power supplies. The power supply modules are auto-switching capable, enabling them to automatically sense and operate at a 100v to 240v input voltage. An amber light will be illuminated on the power supply when the power is off. An illuminated green light indicates that the power supply is operating. Any one of the power supply modules can be replaced without powering-down the system. Replacement power supply units may be ordered directly from Supermicro. Power Supply Replacement Changing the Power Supply 1.

With the system running, unplug the AC power cord from the failed power supply module. 2. Push and hold the release tab on the back of the power supply. 3. Grasp the handle and pull the power supply out of its bay. 4. Push the replacement power supply module into the empty bay until it clicks into the locked position. 5. Plug the AC power cord back into the new power module. Figure 6-9. Replacing a Power Supply Release Tab Handle 6-9