Supermicro 8048B-TRFT — SuperServer 8048B-TRFT User's Manual

Chapter 7: BIOS Interrupt 19 Capture Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to Immediate, the BIOS ROM of the host adaptors will immediately capture Interrupt 19 at bootup and allow the drives that are attached to these host adaptors to function as bootable disks. If this item is set to Postponed, the BIOS ROM of the host adaptors will only capture Interrupt 19 during bootup from a legacy device. The options are Immediate and Postponed. Power Configuration Watch Dog Function If enabled, the Watch Dog timer will allow the system to automatically reboot when a non-recoverable error that lasts for more than five minutes occurs.

The options are Enabled and Disabled. Power Button Function If this feature is set to Instant Off, the system will power off immediately as soon as the user presses the power button. If this feature is set to 4 Seconds Override, the system will power off when the user presses the power button for 4 seconds or longer. The options are Instant Off and 4 Seconds Override. Restore on AC Power Loss Use this item to set the power state after a power outage. Select Stay Off for the system power to remain off after a power outage. Select Power On to turn on the system power after a power outage. Select Last State to allow the system to resume its last power state before a power outage.

The options are Power On, Stay Off, and Last State . CPU Configuration This submenu displays the following CPU information as detected by the BIOS. It also allows the user to configure CPU settings. Processor 0/Processor 1/Processor 2/Processor 3 This submenu displays the following information of the CPU installed in Socket 1, Socket 2, Socket 3, and Socket 4. Processor Socket Processor ID Processor Frequency 7-5