SUPERSERVER 8048B-TRFT USER'S MANUAL DCU IP Prefetcher If this feature is set to Enable, the IP prefetcher in the DCU (Data Cache Unit) will prefetch IP addresses to improve network connectivity and system performance. The options are Enable and Disable. DCU Mode Use this feature to set the data-prefecting mode for the DCU (Data Cache Unit). The options are 32KB 8Way Without ECC and 16KB 4Way With ECC. Direct Cache Access (DCA) Select Enable to use Intel DCA (Direct Cache Access) Technology to improve the efficiency of data transferring and accessing. The options are Enable and Disable.
DCA Prefetch Delay A DCA Prefetcher is used with a TOE (TCP/IP Offload Engine) adapter to prefetch data in order to shorten execution cycles and maximize data processing efficiency. Prefetching data too frequently can saturate the cache directory and delay neces sary cache access. This feature reduces or increases the frequency the system prefetches data. The options are [8], [16], [32] , [40], [48], [56], [64], [72], [80], [88], [96], [104], [112], [120]. Extended APIC (Advanced Programmable Interrupt Controller) Based on Intel's Hyper-Threading architecture, each logical processor (thread) is assigned 256 APIC IDs (APIDs) in 8-bit bandwidth.
When this feature is set to En able, the APIC ID will be expanded from 8 bits to 16 bits to provide 512 APIDs to each thread to enhance CPU performance. The options are Disable and Enable. AES-NI Select Enable to use the Intel Advanced Encryption Standard (AES) New Instruc tions (NI) to ensure data security. The options are Enable and Disable. Down Stream PECI (Platform Environment Control Interface) Select Enable to allow the client server to interact with the host server directly to achieve better host-client communication in the PECI platform, which will result in power saving and energy use efficiency. The options are Disable and Enable.
Advanced Power Management Configuration Advanced Power Management Configuration Power Technology Select Energy Efficient to support power-saving mode. Select Custom to cus tomize system power settings. Select Max Performance to optimize system 7-8