Preface Preface About This Manual This manual is written for professional system integrators and PC techni- cians. It provides information for the installation and use of the Super- Server 8060. Installation and maintainance should be performed by experi- enced technicians only. The SuperServer 8060 is a high-end quad processor 4U rackmount server based on the SC860 4U rackmount server chassis and the S2QE6, a quad processor motherboard that supports up to four Pentium III/II Xeon proces- sors and 16 GB SDRAM main memory. Manual Organization Chapter 1:
Introduction The first chapter provides a checklist of the main components included with the server system and describes the main features of the SUPER S2QE6 mainboard and the SC860 chassis, which make up the SuperServer 8060. Chapter 2: Server Installation This chapter describes the steps necessary to install the SuperServer 8060 into a rack and check out the server configuration prior to powering up the system. If your server was ordered without processor and memory com- ponents, this chapter will refer you to the appropriate sections of the manual for their installation. Chapter 3:
System Interface Refer here for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system. Chapter 4: System Safety You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the SuperServer 8060. iii