Chapter 5: Advanced Motherboard Setup 5-6 Adding PCI Cards 1. 64-bit PCI slots: The S2QE6 has six 64-bit PCI slots. Two of these are 66 MHz slots that are keyed to only accept 66 MHz, 3V PCI cards. The other four 64-bit, 66 MHz slots can also run at 33 MHz and are backward compatible with 32-bit cards. 2. PCI card installation: You are now ready to install your PCI add-on cards. Make sure you choose the correct slot for the type of card you are installing (see step 1). First, remove the I/O shield for the proper slot. Then fully seat the card into the slot, pushing down with your thumbs evenly on both sides of the card.
Finish by using a screw to secure the top of the card shield to the chassis. The I/O shields protect the motherboard and its compo- nents from EMI and aid in proper ventilation, so make sure there is a shield covering each slot. Figure 5-6. Adding PCI Cards 64-bit, 66/33 MHz PCI Slots (4) 64-bit, 66 MHz PCI Slots (2) MEC Slot CPU Slots 5-11