Supermicro SuperServer 8060 — Supermicro SuperServer 8060 User Manual PDF – 4U Quad Xeon Server Guide

S UPER S ERVER 8060 Manual 5-7 Connector Definitions Table 5-1 ATX Power Supply Connector Pin Definitions (ATX PWR #1, ATX PWR #2) Power Supply Connectors The S2QE6 has two primary power supply connectors: ATX POWER #2 and ATX POWER #2. You should connect power to both of these two primary connectors. See Table 5-1 for pin definitions. Secondary Power Connector Table 5-2 Secondary Power Connector (PWR_SEC) Use of the secondary power con- nector (PWR_SEC) is recom- mended when a heavy load of pe- ripherals has been added to the motherboard. Note: Be sure to use a 6- pin connector and check the power supply lay- out before attaching it. See Table 5-2 for pin definitions.

Power LED Table 5-3 PWR_LED Pin Definitions (JF1) The Power LED connection is lo- cated on pins 1, 3 and 5 of JF1. See Table 5-3 for pin definitions and Figure 5-2 for pin locations. Fan Fail LED (FFL) Table 5-4 Fan Fail LED Pin Definitions (JF1) The Fan Fail LED connection is lo- cated on pins 2 and 4 of JF1. See Table 5-4 for pin definitions and Figure 5-2 for pin locations.

5-14 Pin Number Definition Pin Number Definition 1 3.3V 2 3.3V3 3 Ground 4 5V 5 Ground 6 5V 7 Ground 8 PW-OK 9 5VSB 10 12V 11 3.3V 12 -12V 13 Ground 14 PS-ON 15 Ground 16 Ground 17 Ground 18 -5V 19 5V 20 5V Pin Number Definition 1 2 3 4 5 6 Ground Ground Ground +3.3V +3.3V +5V (keyed) Pin Number Definition 1 3 5 +5V Key GND Pin Number Definition 4 6 +5V Ground