Supermicro SuperServer 8060 — Supermicro SuperServer 8060 User Manual PDF – 4U Quad Xeon Server Guide

Chapter 6: Advanced Chassis Setup SCSI Power Cables SCSI power cables should be routed in such a way that they do not block the airflow through the chassis. There is a 4-pin connector for the power cables. Connect the connector to the SCA SCSI backplane as noted in Step 3 ("Configuring the hot-plug SCSI drives"). SCA Backplane The SCSI drives plug into a SAF-TE compliant SCA backplane that provide power and bus termination. A RAID controller can be used with the SCA backplane to provide data security. The operating system you use must have RAID support to enable the hot-swap capability of the SCSI drives. All the jumpers on the SCA backplane are preset and should not be changed.

See Figure 6-6. Overheat Warning Header (Connects to Control Panel) Figure 6-6. SCA Backplane Use caution when working around the SCA backplane. Do not touch the backplane with any metal objects and make sure no ribbon cables touch the backplane or obstruct the holes, which aid in proper airflow. ! 6-9