S UPER S ERVER 8060 Manual Standard CMOS Setup Date and Time Configuration Select the Standard option. Select the Date/Time icon. The current values for each category are displayed. Enter new values through the keyboard. Floppy A Floppy B Choose the Floppy Drive A or B icon to specify the floppy drive type. The settings are Not Installed, 360 KB 5ј inch, 1.2 MB 5ј inch, 720 KB 3Ѕ inch,1.44 MB 3Ѕ inch or 2.88 MB 3Ѕ inch. Note: The Optimal and Fail-Safe settings for Floppy Drive A are 1.44 MB 3 1/2 inch and for Floppy Drive B are Not Installed . Pri Master Pri Slave Sec Master Sec Slave Type How to Configure Type Select Type. The options are 1-46, User, Auto, CDROM, ARMD.
1-46 indicates the prefined type of the parameters. Select Enter to enter the parameter type manually. If Auto is selected, the parameter type will be set automatically on each boot. Select CDROM when ATAPI CDROM drives are used. Select ARMD if LS120, MO, Iomega Zip drives are used, or Press enter to let the BIOS autodetect the parameter type. 7-4