Supermicro SuperServer E100-9AP — 2.1 Removing Power

SuperServer E100-9AP User's Manual Chapter 2 Maintenance and Component Installation This chapter provides instructions on installing and replacing main system components. To prevent compatibility issues, only use components that match the specifications and/or part numbers given. Installation or replacement of most components require that power first be removed from the system. Please follow the procedures given in each section. 2.1 Removing Power Use the following procedure to ensure that power has been removed from the system. This step is necessary when removing or installing non-hot-swap components or when replacing a non-redundant power supply. 1.

Use the operating system to power down the system. 2. After the system has completely shut down, disconnect the AC adapter power cord from the power source. 3. Disconnect the power cord from the chassis. 16