Supermicro SuperServer E100-9AP — 3.3 Internal Expansion Slots

SuperServer E100-9AP User's Manual USB 2.0 Ports Four rear panel I/O USB ports are located above the COM ports. See the table below for pin definitions. 3.3 Internal Expansion Slots M.2 Slot M.2 is formerly known as Next Generation Form Factor (NGFF) and is located at JMD1 on the bottom side of the motherboard. The M.2 slot is designed for internal mounting devices. The A2SAN-H/-L/-E/X11SAN motherboard deploys a B-KEY for SATA/PCIe SSD devices or USB/PCIe WWAN or GNSS card. The A2SAN-H/-L/-E/X11SAN deploys a 2280 screw hole location for a 2280 M.2 module. 2242 and 3042 M.2 modules are supported by an extender bracket to fit on the 2280 screw hole location.

24 RS-485 D-SUB Connector Pin Definitions Pin# Definition Pin# Definition 1 DATA- 2 DATA+ 3 N/A 4 N/A 5 GND 6 N/A 7 N/A 8 N/A 9 N/A Rear Panel USB 2.0 Ports Pin Definitions Pin# Definition 1 VCC 3 USB Data- 3 USB Data+ 4 Ground