Supermicro SuperServer E100-9APP — Supermicro SuperServer E100-9APP User's Manual PDF (Revision 1.0a)

Chapter 5: BIOS If the above is set to Enable, CPU P State will display: CPU P State Control P State Domain This feature allows the user to indicate the P-State domain for each logical process in the system. All processes indicate the same domain in the same package. The options are ALL and ONE. P-State Coordination This feature allows the user to change the P-State (Power-Performance State) coordination type. P-State is also known as "SpeedStep" for Intel processors. Select HW_ALL to change the P-State coordination type for hardware components only. Select SW_ALL to change the P-State coordination type for all software installed in the system.

Select SW_ANY to change the P-State coordination type for a software program in the system. The options are HW_All, SW_ALL, and SW_ANY. Energy Efficient P-State Select Enable to support power-saving mode for P-State. The options are Disable and Enable. Boot Performance Mode This feature allows the user to select the performance state that the BIOS will set before the operating system handoff. The options are Max Performance and Max Efficient. Turbo Mode Select Enable for processor cores to run faster than the frequency specified by the manufacturer. The options are Disable and Enable . CPU HWPM State Control Enable CPU HWPM Select Enable for better CPU energy performance.

The options are Disable , HWPM NATIVE MODE, and HWPM OOB MODE. Enable CPU Autonomous Cstate Use this feature to enable CPU Autonomous C State, which converts HALT instructions to Mwait. The options are Disable and Enable. CPU C State Control CPU C State Use this feature to enable the enhanced C State of the CPU. The options are Disable and Enable . 35