Supermicro SuperServer E200-9AP — Supermicro SuperServer E200-9AP User's Manual (Revision 1.0) PDF Download

SuperServer E200-9AP User's Manual Jumper Description Default Setting Connector Description LED Description Status 12 JBT1 CMOS Clear Open (Normal); Short: Clear CMOS JI2C1/JI2C2 SMB to PCI-E Slots Enable/Disable Pins 1-2 (Enabled) JPAC1 Audio Enable Pins 1-2 (Enabled) JPL1 LAN1 Enable/Disable Pins 1-2 (Enabled) JPL2 LAN2 Enable/Disable Pins 1-2 (Enabled) JPME2 Maufacturing Mode Pins 1-2 (Normal) JWD1 Watch Dog Timer Pins 1-2 (Reset) BT1 Onboard Battery COM Ports supported by Novuton 5523D (COM1 in RJ45, COM1/2 support RS-232, COM1-COM3 COM3 supports RS-485) EDP1 Embedded DisplayPort (switch with VGA) FAN1, FAN2 System/CPU Fan Headers (FAN1:

CPU Fan) HDMI, DP High Definition Multimedia Interface/DisplayPort I-SATA0, I-SATA1 Intel SATA 3.0 Ports JD1 Speaker Header JF1 Front Panel Control Header JGP1 General Purpose I/O Header JL1 Chassis Intrusion Header JMD1 M.2 PCI-E 2.0 x2 Slot / I-SATA Slot 4-pin Power Connector for HDD devices (provides power from the motherboard to JPH1 system HDD devices.) JPW1 24-pin ATX Power Connector JPV1 12V 4-pin Power Connector JSD1 SATA DOM Power Connector JSTBY1 Standby Power Header JTPM1 Trusted Platform Module/Port 80 Connector LAN1/LAN2 LAN (RJ45) Ports M2 SRW1, M2 SRW3 _ _ M.2 Mounting Screws SLOT1 CPU PCI-E 2.0 X2 (IN X8) Slot USB0/1 Back panel USB 2.0 Port USB2/3 Back panel USB 3.0 Port USB4 USB 2.0 Type A Header USB8/9 Front Accessible USB 2.0 Headers VGA VGA Port (switch with EDP1) LED1 Power LED S3 Blink Function Blinking Green:

S3 function LED2 System Power LED Solid Blue: Power On LED3 P5V STBY Power LED _ 5V Standby Power Ready